Description:
* Phoene model: to select the type of phone (just until the series CF65)
* Read flash from phone: to make backups of phone firmware
* Write flash from phone: to enter the firmware to the phone (flashing)
* Unlocking functions: to unlock procedure
* Miscellaneous functions: Additional functions such as backup and battery parameters bootcore
* Dongle functions: setting function dongle
* Configuration function: contains settings for COM, Speed, Boot type etc.
* Exit: to exit from the program
Step Flashing:
Prior to Siemens mobile phone flashing process must first be "Test Point" or cutting lines on the board. Each execution of each command must be accompanied by pressing the "ON" in the phone around - + 1 second.
1. Connect cable with mobile phone
2. Select the type of phone that will be executed
3. Click Write flash to phone
4. Take firmware will be input into the phone and click OK
5. Button on the phone at the press once
6. Wait until the process is complete 100%
7. Click Unlocking functions
8. Select Direct unlock no map is saved
9. Click the Use Original IMEI
10. Click Exit to exit the program
* Phoene model: to select the type of phone (just until the series CF65)
* Read flash from phone: to make backups of phone firmware
* Write flash from phone: to enter the firmware to the phone (flashing)
* Unlocking functions: to unlock procedure
* Miscellaneous functions: Additional functions such as backup and battery parameters bootcore
* Dongle functions: setting function dongle
* Configuration function: contains settings for COM, Speed, Boot type etc.
* Exit: to exit from the program
Step Flashing:
Prior to Siemens mobile phone flashing process must first be "Test Point" or cutting lines on the board. Each execution of each command must be accompanied by pressing the "ON" in the phone around - + 1 second.
1. Connect cable with mobile phone
2. Select the type of phone that will be executed
3. Click Write flash to phone
4. Take firmware will be input into the phone and click OK
5. Button on the phone at the press once
6. Wait until the process is complete 100%
7. Click Unlocking functions
8. Select Direct unlock no map is saved
9. Click the Use Original IMEI
10. Click Exit to exit the program
{ 0 komentar... Views All / Send Comment! }
Post a Comment