Mx-Key Tutorial

Menu "Flash" Generation to select the type of market nokia ex: DCT3, DCT4, and BB5 DCTL Model: To select the HP product nokia Market: To select the language package MCU: To select the system PPM: To select the language package CNT: To select content that will be included ex: wallpapers & ringing tones To retrieve all the files kill 2x on the right side that reads "Doule click to open file" and at the box checked. BUS Check: To know konecsi between HP with what good software bad Flash: To start the flashing process

Flashing Process: On Generation Select market from HP that will be in flash Select Model HP for the manual and press the "scan" for automatic Enter the MCU and PPM Check the column "After Flash Processing" Click the "Flash" to start flashing process.

After the flashing process is complete do the UI Settings In the "Factory Reset Values" check the column for the manual and press the "Reset Selected" or "Reset All" to automatic.

Working with IMEI On the menu there is an additional MXKEY IMEI & Security The usefulness of this menu very much, namely: To backup RPL / IMEI To Read ASK Incorporate RPL / IMEI RPL Calculator Restore IMEI

How to backup RPL / IMEI: Select the "Backup Rpl" wait until the process is complete and store the results (press the "Save").

How to enter the RPL / IMEI or IMEI shoot: Click "Write Rpl" give tandacentang "data1 Only" if only imei in IC Flash0 that will be in the firing. Find RPL that will be inserted and click "Open" Wait until the process is complete. Note: RPL or IMEI located at 2 places, namely UEM and Flash IC 0. The difference between the UEM and IC imei FL0 will cause imei ????????????? So if you do your Fl0 IC replacement is required to equate IMEI in UEM and vice versa.

Tuning mode signal on the CDMA with MXKEY: Log on the menu "Tools">> CDMA>> Tune Parameters Click the Open button to menambil his file. Once the file to select it and press Open All data will be entered automatically and to process tuningnya click the "Write"