This damage is characterized by the absence of the incoming voltage to the battery or the phone cans not recharge the battery voltage. This damage cans be the caused by hardware and software.
The caused by calibration errors carging That file is on file PM (Permanent Memory). So That the phone cans not process information relating to the process of charging the battery voltage. Usually damage the software on the mark with the Emergence of writing "no fill"on the LCD screen. This damage cans be overcome by Including the files PM. How to enter the file PM (reflash) I have explained in the discussion of "keguanaan button on UFS".
Hardware:
1. chagernya checked, still good or not
2. plugin check charge, conektor still good or not
3. check the track pad on the board and
4. check the fuse, the component That reads the letter "K"
5. konector check the voltage on the battery, the voltage is 6-8volt
6. check ic charger
7. CPU checks
1. chagernya checked, still good or not
2. plugin check charge, conektor still good or not
3. check the track pad on the board and
4. check the fuse, the component That reads the letter "K"
5. konector check the voltage on the battery, the voltage is 6-8volt
6. check ic charger
7. CPU checks
{ 0 komentar... Views All / Send Comment! }
Post a Comment